DESCRIPTIVE TRANSCRIPT Disposition: ACCEPTED Approval scope: Exact local integration candidate; not deployed or published Thinkific QA lesson: 77635945 — Calibrate a print Source video: /media/v11/046-calibrate-a-v11-print.mp4 Source SHA-256: f8700095d541b4e3f5642acddb86f8f8a907796db39a75fa8cd7e7205e2014dd Source bytes: 2339918 Container duration: 45.588000 seconds Audio classification: English narration in three active regions; source narration begins and ends mid-sentence Scope note ---------- This file describes what the frozen historical source video visibly shows. It does not certify that every depicted screen, specification, credential, product or operating sequence is current for a Canadian V11. Use the current NailPrinter.ca Owner Start Guide and model-specific Support route if the hardware, app, screen or sequence differs. Timed visual description ------------------------ 00:00–00:06 A phone shows the O2Nails app home screen and then a settings list. The embedded subtitle begins with Enter APP, while the audible narration begins mid-sentence with And then click Settings. 00:06–00:11 Position Calibration is selected, followed by Print Position Calibration. 00:11–00:18 A calibration screen shows a printer Wi-Fi connection control being switched on. 00:18–00:24 A folded piece of white paper is inserted into the V11 opening and spread across the printed calibration frame. 00:24–00:28 The Print control is tapped and a printing progress box appears. 00:28–00:35 The phone displays the printed rectangular frame against a dotted reference frame. 00:35–00:37 A finger drags the dashed rectangle to align it with the dotted frame. 00:37–00:40 The Save icon is tapped. 00:40–00:42 The app displays Saving calibration data and then Opening camera. The visible subtitle completes the sentence It will be OK after the data is saved, but the audible narration itself cuts off after the word the. 00:42–00:45.588 A NailPrinter.ca Step Complete card says to record the result and continue to the next lesson.