DESCRIPTIVE TRANSCRIPT
Disposition: ACCEPTED
Approval scope: Exact local integration candidate; not deployed or published
Thinkific QA lesson: 77635948 — Test and clean the cartridge
Source video: /media/v11/038-test-and-clean-the-v11-sm10-cartridge.mp4
Source SHA-256: e46e2c0a558b7b1e0e0c997e2c2d666ff65df6f226ebd5adc3c14708fdf9b789
Source bytes: 7051532
Container duration: 118.521333 seconds
Audio classification: sample-exact digital silence for the full decoded audio track

Scope note
----------
This file describes what the frozen historical source video visibly shows. It does not certify that every depicted screen, specification, credential, product or operating sequence is current for a Canadian V11.
Use the current NailPrinter.ca Owner Start Guide and model-specific Support route if the hardware, app, screen or sequence differs.

Timed visual description
------------------------
00:00–00:07  A pale title introduces troubleshooting for the SM10 ink cartridge.
00:07–00:15  A phone displays No ink cartridge is detected, followed by a card saying there are several possible causes.
00:15–00:29  A green-topped cartridge is shown, a strip or seal is handled, and the cartridge is placed back into the V11.
00:29–00:44  Close views show the upper part of the cartridge slot. A red circle highlights the top buckle.
00:44–01:06  Side-by-side examples compare the buckle position. A hand presses the cartridge slightly inward and another close-up shows the buckle returning to the indicated horizontal position.
01:06–01:21  The video points to the cartridge-slot contact area with a red arrow.
01:21–01:35  A hand wipes the contact area with a white cloth. On-screen text says Clean the contactor.
01:35–01:48  The cartridge is shown beside warning graphics. The visible wording warns against laying it sideways or reversed.
01:48–01:58.521  A fan graphic and red X indicate keeping the cartridge away from moving air; the video then fades to a pale blank frame.