DESCRIPTIVE TRANSCRIPT
Disposition: ACCEPTED
Approval scope: Exact local integration candidate; not deployed or published
Thinkific QA lesson: 77635940 — Install the SM10 cartridge
Source video: /media/v11/014-install-the-v11-sm10-cartridge.mp4
Source SHA-256: ba4a429c1e25e9086a14adb880c9407758b3102b3196685b94bae3d73922f193
Source bytes: 6967459
Container duration: 57.388000 seconds
Audio classification: upbeat pop music with indistinct sung vocals from approximately 00:03.250 to 00:53.500; no intelligible speech

Scope note
----------
This file describes what the frozen historical source video visibly shows. It does not certify that every depicted screen, specification, credential, product or operating sequence is current for a Canadian V11.
Use the current NailPrinter.ca Owner Start Guide and model-specific Support route if the hardware, app, screen or sequence differs.

Timed visual description
------------------------
00:00–00:03  A NailPrinter.ca quick-lesson card reads Install the V11 SM10 Cartridge.
00:03–00:07  A hand pulls down the V11 front panel. An embedded English subtitle says Take down the front panel.
00:07–00:14  The rear control is pressed twice and the internal cartridge holder moves into view; the video depicts this historical sequence without independently validating it.
00:14–00:22  A green-topped cartridge is brought to the open compartment and angled toward the cartridge holder.
00:22–00:36  Close views show the cartridge being pushed upward with a thumb. Red arrows indicate the direction of movement.
00:36–00:43  The cartridge is pressed into place. Embedded wording refers to two clicks and says the cartridge should sit flat.
00:43–00:51  The rear control is pressed twice again and the holder retracts inside the V11.
00:51–00:57.388  A NailPrinter.ca Step Complete card says to record the result and continue to the next lesson.